Table of Contents
Advertisement
N300-P INSTRUCTION MANUAL
2.1 Installation
Be sure to install the unit on flame resistant material such as metal.
Otherwise, there is a danger of fire.
Be sure to place anything inflammable in the vicinity.
Otherwise, there is a danger of fire.
Do not carry unit by top cover, always carry by supporting base of unit.
There is a risk of falling and injury.
Be sure not to let the foreign matter enter such as cut wire refuse, spatter from welding, iron refuse,
wire, dust, ect.
Otherwise, there is a danger of fire.
Be sure to install it in a place which can bear the weight according to the specifications in the text.
(Chapter 6. Specifications)
Otherwise, it may fall and there is a danger of injury.
Be sure to install the unit on a perpendicular wall which is not subject to vibration.
Otherwise, it may fall and there is a danger of injury.
Be sure not to install and operate an inverter which is damaged or parts of which are missing.
Otherwise, there is a danger of injury.
Be sure to install it in a room which is not exposed to direct sunlight and is well ventilated. Avoid
environments which tend to be high in temperature, high in humidity or to have dew condensation,
as well as places with dust, corrosive gas, explosive gas, inflammable gas, grinding-fluid mist, salt
damage, etc.
Otherwise, there is a danger of fire.
Chapter 2 Installation and Wiring
CAUTION
Hide quick links:
Advertisement
Table of Contents
