Hyundai N300-P Instruction Manual page 45

N300-P INSTRUCTION MANUAL
Frequency conversion monitor
This inverter displays the value changed by the Inverter output ferquency and the valye
set in b086 on the monitor part.
"Monitor part of display" = "output frequency9d001)" x "output frequency factor(b086)"
(Display) Display of d007
0.00 - 99.99 : Display is in 0.01 unit.
100.0 - 999.9 : Display is in 0.1 unit
100. - 9999. : Display is in 1 unit.
1000 - 3996 : Display is in 10 unit.
(Range of setting) The setting range of b086
0.1 - 99.9 : Set it with the 0.1 unit.
(Example) Output frequency (d001) :50.00Hz
When the frequency conversion factor (b086) is 1.1,
the frequency conversion monitor (d007) displays "55.00" as "50 x 1.1 = 55.00"
(Note) Output frequency of FW terminal becomes same as b007 at the time of setting up
the digital output frequency to the FW terminal.
Output torque monitor
This inverter displays the output torque estimation value.
The monitor lamp "%" should illuminate while the contents of d012
are displayed.
Display substitutes only at the time of the sensorless vector control, 0Hz domain sensorless vector
control and vector control.
(Display)
-300.0 - 300.0 : Display is in 1% unit
Output voltage monitor
This inverter displays the output voltage of the inverter converted
into the alternating voltage.
The monitor lamp "V" should illuminate while the contents of d013
are displayed.
(Display)
0.0 - 600.0 : Display is in 0.1V unit.
Input electric power monitor
Display input electric power from inverter.
The monitor lamp "kW" ("V" and "A") should illuminate while the contents of
d014 is displayed.
(Display)
0.0 - 999.9 : Display is in 0.1kW unit.
Chapter 4 Explanation of function
Relation code
d007 : Frequency conversion
monitor
b086 : Frequency conversion
factor
Relation code
d012 : Output torque monitor
Relation code
d013 : Output voltage
monitor
Relation code
d014 : Input electric
power monitor