Setting The Pump Level - Lauda E 4 G Operating Instructions Manual

ECO GOLD
Tset
Setpoint Value
Max: 202.0
Min: -30.0
‫ סּ‬OK
ESC
7.4.3

Setting the pump level

With the ECO Vario pump you have six pump levels available with which you can optimise the bath
circulation, flow rate and pressure, the noise generated and the mechanical heat input. With small
thermostats (e.g. E 4 G, RE 415 G, RE 420 G) without an external load, power levels 1 to 3 are practi-
cable and sufficient.
Pump Level
Stage 6
Stage 5
Stage 4
Stage 3
Stage 2
Stage 1
‫ סּ‬OK
ESC
28.04.10/ YACE0088
−
−
−
−
25,0
−
+/-
−
−
.
−
−
Standby
−
Putting the device into operation
Select with . The entry window appears. The tem-
perature value is displayed with a flashing underscore.
The maximum and minimum possible adjustable tempera-
ture values are displayed.
Change the value with
By pressing or you can also select numbers indi-
vidually and change them with
By pressing (+/-) the arithmetic sign "+" or "-" can be
selected.
You confirm the set value by pressing
By pressing (ESC) you are returned to the menu
level without the set-point being changed.
Access to the main menu level is obtained by pressing
.
The adjacent menu window appears by selecting and con-
firming Setup Pump
The level can be selected with
level is immediately active without confirmation. In this ex-
ample it is Stage 6.
You quit the menu with
or .
or .
.
Level.
or . The selected
(ESC) or .
37