Setting The Temperature Set-Point Value; Setting The Pump Level - Lauda ECO GOLD Operation Manual

7.4.2

Setting the temperature set-point value

By pressing
-
7.4.3

Setting the pump level

With the ECO Vario pump you have six pump levels available with which you can optimize the bath circulation, flow
rate and pressure, the noise generated and the mechanical heat input. With small thermostats (e.g. E 4 G, RE 415 G,
RE 420 G) without an external consumer power levels 1 to 3 are practicable and sufficient.
You quit the menu by pressing
-
52 / 137
The entry window appears. The cursor below the temperature value
flashes and can be changed within the displayed limits.
(ESC) you are returned to the menu level without any change.
(ESC)
Access to the main menu level is obtained by pressing the en-
-
ter key .
Select the menu point "Set-point temperature" using the en-
-
ter key .
Change the value with
-
Single figures can be selected by pressing
-
By pressing (+/-), with appropriate equipment, the arith-
-
metic sign can be changed.
Confirm your choice with the enter key
-
Access to the main menu level is obtained by pressing the en-
-
ter key .
The adjacent menu window appears by selecting and confirm-
-
ing  Setup Pump

The level can be selected with
-
immediately active without confirmation.
or .
ECO Gold
or .
or
.
level.
or . The selected level is
.
10/2019 i