Lauda E 4 G Operating Instructions Manual page 54

Creating a program:
Programmer
Program 1
Program 2
Program 3
Program 4
Program 5
‫ סּ‬OK
ESC
No. Tend hh
Start
30.00 --
2 50.00
3
50.00
4 70.00
5 60.00
6 30.00
‫ סּ‬new
ESC
No. Pump S1
Start
2
2 2
3
3
4 4
5 2
6 2
‫ סּ‬OK
ESC
54
− New segments and be inserted and existing ones changed, also the currently ac-
tive segment, even when a program is currently being executed. Furthermore, ex-
cept for the currently active segment, all segments can be deleted at any time.
− Changes to the currently running segment are possible. The segment is continued
as though the change has been valid since the start of the segment.
But: If the new segment time is shorter than the already expired segment time,
then the program skips to the next segment.
− If a segment time is required > 999h: 59min, then this time must be spread over
several consecutive segments.
−
.►
−
►
►
►
►
Standby
−
mm Tolerance
--
0.1
20
0 0.0
0 20 0.0
−
0 20 0.1
0 30 0.0
0 0 0.0
−
delete
−
S2 S3
off - - - off
off - - - off
off - - - off
off - - - off
off - - - off
off - - - off
- - -
Putting the device into operation
Programming example (
Access to the menu level is obtained by pressing
The adjacent menu window appears by selecting and confirm-
ing Programmer.
By selecting and confirming
cess to the editor view of the programmer. To view the complete
window information go to the right with
With the keys ,
individual segments.
The appropriate parameter is selected with
changed with and
You can quit the edit window with the cursor in any position
without changes using
on a segment number, using
the programmer without changes.
7.8.1)
Program 1 Edit
.
, and you obtain access to the
.
(ESC). When the cursor is located
you return to the menu level of
ECO GOLD
.
you obtain ac-
and can be
28.04.10/ YACE0088