Setting Pump Power Or Standby - Lauda PROLINE Kryomats Series Operating Instructions Manual

Master
or
/1%/1
Command
T °C
set
25.
T °C
ext
25.
Help Menu

7.5.3 Setting pump power or standby

With the Proline VarioFlex pump, four pump levels (level five till level eight) are available, with which the
bath circulation, flow rate and pressure, the noise generated and the mechanical heat input can be
optimized. Pump level eight gives the best bath circulation and temperature homogeneity.
Master
and 1 x
Os 4
or
44
− EXT
− Switches to the actual-value display of the external temperature
probe (or to the actual value received from an interface module
7.5.4).
− EXT is lit in green next to the row of figures.
− If no external Pt100 probe is connected,
°C ,,,,,
EXT
Level
4
00
T °C
int
25.
01
Pump
02
Screen T
set
Os
−
− Call pump power levels display
− The current pump level is displayed (here
°C
− The pump levels display flashes.
− Select pump level (pump speed = pump power):
4
/
−
machine are deactivated).
is displayed.
− T
− Provided an external temperature probe is
connected, its value is displayed in the
lower left part of the standard and super
windows (applies to the works setting for
the window partitioning).
− External actual temperatures can also
be read in via interface modules
3
T
fix
7
to for pump operation. Pump responds immediately!
activates the standby function (pump, heater and refrigerating
Starting up
Proline Kryomats
ext
Os
.
4
).
8.
YAUE0007 / 2/26/2009