Lauda E 4 G Operating Instructions Manual page 34

Examples of display representation:
Main menu
Main Menu
T Setpoint Value
SET
Setup
Programmer
Interfaces
Graph
Clock
Standby
‫ סּ‬OK
ESC
Submenu Cooling
Cooling
off
on
automatic
‫ סּ‬OK
ESC
34
In the main menu the following information is displayed:
−
The selected menu point is displayed inversely.
−
In front of each menu point symbols are displayed which sup-
►
port the menu point graphically.
►
−
An arrow
menu level is available.
►
−
A padlock
►
is locked.
−
The soft-key bar is shown in the lower region of the display.
The following functions can be selected with the soft keys:
Standby
ESC:
OK:
−
Standby:
In the window the following information is displayed:
−
The setting
pressing
.
−
A tick
active. In the example this indicates that the cooling is set to
"automatic".
Standby
Putting the device into operation
behind the menu point indicates that a further
behind the menu point indicates that the function
You are returned to the basic window.
You enter the submenu. This can also occur by
pressing .
Standby is activated. If
highlighted, standby is active. If not, the device is
in operation.
on is displayed inversely and can be selected by
.
behind the menu point indicates that this setting is
ECO GOLD
Standby is inversely
28.04.10/ YACE0088