Error Store; Device Data; Software Version - Lauda E 4 G Operating Instructions Manual

ECO GOLD
9.3.1

Error store

With the ECO GOLD thermostats there is an error store in which up to 140 errors and alarm messages
can be stored for the analysis and localisation of errors.
No. Source Code Type
5 Control 29 Error
4 Safety 3 Alarm
3 Control 4 Warn
2 Safety 29 Error
1 Control 36 Error
Safety Overtemperature
‫ סּ‬OK
Display
9.3.2

Device data

The most important device parameters are displayed under the menu point Device data.
Device data
T_int
T_lp
T_chip
T_b_s
T_a
T_max_s
T_mos
‫ סּ‬OK
ESC
9.3.3

Software version

Under the menu point SW version the appropriate software versions are displayed, depending on the
device type and connected modules.
SW version
Control
Safety
Cool
Ext Pt
Analog
Serial
Contact
‫ סּ‬OK
ESC
28.04.10/ YACE0088
−
Access to the menu level is obtained by pressing
−
Date Time Selection and confirmation of
17.03.10 16:32 Device Status
16.03.10 10:32
−
The last message is located in the first position.
15.03.10 16:41
−
Each message line can be marked with
12.03.10 17:02
footer the message appears in plain text.
11.03.10 08:04
−
The relevant module which is causing the message is dis-
played under Source.
−
Code is the number to which the message described in
Standby
plain text is assigned.
−
Type: Alarm, warning or error.
−
22.23°C
Access to the menu level is obtained by pressing
-86.33°C
−
Selection and confirmation of
78.72°C
Device Status
23.04°C
-96.33°C
85°C
30.93°C
Standby
−
Access to the menu level is obtained by pressing
1.20
−
Selection and confirmation of
1.20
Device Status
1.10
−
1.15
Only the modules which are connected are displayed with
2.10
the software version number.
2.05
2.08
Standby
Maintenance
Setup
Errorstore.
Setup
Device data.
Setup
SW version.
.
or . In the
.
.
85