Overview Of Configuring External Lus - HP StorageWorks User Manual
External storage xp
Hide thumbs
Also See for StorageWorks:
- User manual (204 pages) ,
- Installation manual (106 pages) ,
- Reference manual (54 pages)
Table of Contents
Advertisement
Overview of configuring external LUs
Figure 29
shows an example of using External Storage XP to configure external LUs.
Figure 29
Overview of configuring external LUs
The following is the general procedure for configuring external LUs.
1.
Configure the port and system parameters for the external disk array. For instructions, see the external
LU's documentation,
external disk
2.
Start External Storage XP operations. For instructions, see the HP StorageWorks Command View XP
user guide for XP Disk Arrays or the HP StorageWorks XP Remote Web Console user guide for
XP12000/XP10000.
3.
Set the external disk array port attribute to External. For instructions, see
port
attributes" on page 59.
4.
Perform the Discovery operation.
In the Device tree on the LU Operation pane, select an external disk array, and select Discovery (see
"Mapping external LUs (Add
58
External Storage XP for the XP12000/XP10000
"Setting an external disk array's
arrays" on page 101.
LU)" on page 60).
port" on page 59, and
"Notes on connecting
"Setting a local disk array's
Advertisement
Table of Contents
Troubleshooting
