Preset List (Lu Operation Pane); Preset Detail Window (Mapping Operation) - HP StorageWorks User Manual

This window contains Enable and Disable options that control the display of unsupported devices. When
you select Enable, information about unsupported disk arrays appears in the Device tree and Device list.
Unsupported disk arrays are indicated by Unknown Devices in the Device tree and Device list.
The Disable option is selected by default.

Preset list (LU Operation pane)

Displays rows from the Device list that are about to be acted upon. You can apply settings to the local disk
array after checking the contents in the Preset list. Information displayed in the Preset list appears in blue
italics in the Device list. If you click Apply in the LU Operation pane, settings displayed in the Preset list are
applied to the local disk array. At that point, the contents of the Preset list disappear and the Device list
appears normally.
If you click Cancel in the LU Operation pane, all settings in the Preset list are canceled.
If settings in the Preset list contain errors, they are not applied to the local disk array even if you click
Apply. In that case, error messages appear and incorrect settings appear in the Preset list. In addition,
error codes appear in the Preset list.
NOTE: Depending on the type of errors that occur, identical error codes might be displayed for all errors
listed in the Preset list. In this case, check the status of settings to identify the source of the error.
When you right-click an item in the Preset list, the following commands appear:
• Detail
Displays the Preset Detail window with detailed information about settings selected in the Preset list.
When an error code appears in the Preset list, a corresponding error message appears in this window.
Figure 24

Preset Detail window (Mapping Operation)

• Delete
Cancels settings selected in the Preset list.
External Storage XP user guide 53