Canceling Defined Alternate Paths; Path Setting Window, Shortcut Menu - HP StorageWorks User Manual

2. In the Device tree, select the external LU group number.
Information about the external LU mapped as an internal XP LDEV appears in the Device list.
3. In the Device list, right-click the external LU, and select Path Setting.
The Path Setting window
alternate path appears in the Configured Paths table, and paths that can be defined as alternate paths
appear in the Available Paths table.
4. In the Configured Paths table, right-click the row of the path defined as the alternate path, and select
Priority Up
The selected row appears at the top of the Alternate Path list, and text in the Priority column changes
from 2 to 1. The alternate path's priority is raised, and the path is set as the currently used path.
Figure 41

Path Setting window, shortcut menu

5. Repeat the Priority Up command until the row of the selected path is displayed on the first line of the
Configured Path list and that row's Priority column changes to 1.
When the Priority column changes to 1, the path is set as the typically used one (primary path).
6. Click OK. The Path Setting window closes, and the LU Operation pane appears.
Selected rows appear in blue italics in the Device list. Specified contents appear in the Preset list. To
check details on intended operations, right-click the setting in the Preset list, and select Detail. To cancel
settings, right-click the setting in the Preset list, and select Delete.
7. Click Apply. A confirmation message appears.
8. Click OK.
The change in the alternate path defined in the Path Setting window is applied to the local disk array,
and specified contents appear in the Device list.
If errors occur during alternate path operations, failed settings and error codes appear in the Preset list.
To check error messages, right-click the failed setting, and select Detail.

Canceling defined alternate paths

1. Follow step 1
2. In the Configured Paths table, right-click the row of the alternate path, and select Delete.
The selected alternate path's definition is canceled, and detailed information about the path is deleted
from the Configured Paths table.
78 External Storage XP for the XP12000/XP10000
(Figure 40) appears. Detailed information about the currently used path and
(Figure 41).
to step 3 in "Defining alternate paths" on page 77.