HP StorageWorks User Manual page 98

Table 11 General External Storage XP troubleshooting (continued)
Error
98 External Storage XP for the XP12000/XP10000
Corrective action
Command aborted
Busy
LDEV reserved
Response error
Initiator port
RCU target port
Unknown port
Status: The reply of the external disk array was
ABORTED COMMAND. An error might have
occurred on the external disk array side.
Corrective action: The port of the external disk array
is recognized. Check the external disk array's setting
and the condition of the connection to the external
disk array (for example, cables or switches). If you
cannot restore the path, contact your HP account
support representative.
Status: The external disk array status is BUSY.
Corrective action: The port of the external disk array
is still recognized. Check the external disk array's
settings and the load on the external disk array (for
example, check whether the configuration assigns
too much load on the external disk array). If you
cannot restore the path, contact your HP account
support representative.
Status: The status of the external disk array is
Reserved. You cannot access the external disk
array's device from the local disk array.
Corrective action: Remove the Reserve status on the
external disk array's device.
Status: The external disk array's status is Blocked
due to an abnormal reply (Response). You might not
be able to access the external disk array's device, or
data protection might be set on the external disk
array's device.
Corrective action: The port of the external disk array
is recognized. Check the external disk array's setting
and status. If you cannot restore the path, contact
your HP account support representative.
Status: The port attribute of the external (for
example, XP) disk array was changed to Initiator.
Corrective action: Set the port attribute of the
external disk array back to target. If you cannot
restore the path, contact your HP account support
representative.
Status: The port attribute of the external disk array
changed to RCU target.
Corrective action: Set the port attribute of the
external disk array to Target. If you cannot restore
the path, contact your HP account support
representative.
Status: The port attribute of the external disk array is
unknown.
Corrective action: The port of the external disk array
is still recognized. Check the condition of the
connection (for example, cables and switches) to the
external disk array. If you cannot restore the path,
contact your HP account support representative.