Configuring External Lus - HP StorageWorks User Manual

Configuring external LUs

To use external storage devices connected to the local disk array, configure the connection to the external
LU. This involves setting port attributes on the local and/or external arrays, mapping external LUs, and
setting alternate paths.
This section describes procedures for using External Storage XP to configure external LUs.
• "Overview of configuring external
• "Setting an external disk array's
• "Setting a local disk array's port
• "Mapping external LUs (Add
• "Setting alternate paths for external
• "Adding alternate paths to multiple external LUs (Add
• "Deleting alternate paths for multiple external LUs (Delete
• "Checking an external LU's status (LDEV
• "Disconnecting external disk arrays or external
• "Checking the connection status and resuming external LU operations (Check Paths & Restore
page 87
• "Restoring external LUs (LDEV
• "Stopping the use of paths to an external LU by specifying an external disk array's WWN (Disconnect
Paths)" on page 89
• "Restoring paths to an external LU by specifying an external disk array's WWN (Check
page 89
• "Changing an external disk array's port
• "Stopping the use of paths to an external LU by specifying a local disk array's port (Disconnect
on page 91
• "Restoring paths to an external LU by specifying a local disk array's port (Check
• "Deleting external LU mappings (Delete
LUs" on page 58
port" on page 59
attributes" on page 59
LU)" on page 60
LUs" on page 74
Information)" on page 82
LUs" on page 85
Restore)" on page 88
setting" on page 90
LU)" on page 92
Paths)" on page 79
Paths)" on page 80
External Storage XP user guide
Vol.)" on
Paths)" on
Paths)"
Paths)" on page 91
57