Path Setting Window - HP StorageWorks User Manual

The Path Setting window displays information about external disk arrays and the condition of paths set
from the internal XP LDEV to the external LU.
Figure 40

Path Setting window

• Vendor
External disk array's vendor.
• Product
External disk array's product name.
• Serial
External disk array's serial number.
• Group
External LU group and reference number of the external LU in the group.
• Characteristic
External LU's identification number.
• Device
External LU's device name.
• Capacity
External LU's capacity in blocks.
• Alternate Path List
Status of alternate paths. The Alternate Path list consists of two tables. The Configured Paths table
displays previously defined paths. The Available Paths table displays available paths. The Alternate
Path list displays the following information:
• Port: Port number in the local disk array connected to the external disk array.
• WWN: External disk array port's identification number.
• LUN: LU number of the external LU.
• Priority: Priority of paths connecting to the external LU. A 1 indicates the path with the highest
priority.
• Status: Status of the path to the external LU. For information about reacting to the displayed status,
see "Troubleshooting External Storage XP" on page 95. Possible values:
Defined
paths
Available
paths
External Storage XP user guide 75