CHAPTER 7 FIXING SYSTEM
9) After mounting the fixing roller and
the fixing heater, push the fixing alu-
minum core [11] with your finger
lightly so as to make sure that the ther-
mal switch [12] returns to its initial po-
sition by the spring.
10) Check to make sure that the static re-
moving brush [13] is in contact with the
fixing roller core [14].
11) After making the check, mount the fix-
ing assembly to the machine using the
steps used to remove it but in reverse.
7-26
COPYRIGHT© 2002 CANON INC.
[12] [11]
F07-306-07
[14]
F07-306-08
2000
CANON iR1600/iR2000 REV.1 JAN. 2002
[13]