Paper Sensor - Canon iR1600 Service Manual

CHAPTER 6 PICKUP/FEDING SYSTEM
4) Pull the registration roller [7] to the
front, and detach the E-ring [7] and the
bushing [8].
5) Remove the busing [9] at the rear, and
detach the registration roller [6].
When mounting the registration
roller, check to make sure that
the grounding plate [11] is in
contact with the bushing [12] of
the registration roller and the
shaft [13] under the registration
roller.
5.4.2 Removing the Registration Paper Sensor
1) Remove the drive assembly (5.3.1 in
Chapter6).
2) Disconnect the connector [1].
3) Free the 4 claws [2], and detach the reg-
istration paper sensor [3].
6-32
[9]
COPYRIGHT© 2002 CANON INC.
[6]
F06-504-03
F06-504-04
[1]
[2]
F06-504-05
2000 CANON iR1600/iR2000 REV.1 JAN. 2002
[8] [7]
[11]
[12]
[13]
[3]