Fixing/Delivery Assembly - Canon iR1600 Service Manual

3.5.4 Fixing/Delivery Assembly

Machine state
1) Is the machine equipped with an inner 2-way tray? Is the jam in
NO:
2-way solenoid, wiring
2) Are the 2-way solenoid and the wiring to the solenoid normal?
NO:
Sensor
3) Is there paper over any of the following sensors? Also, are the flag
YES: Remove the paper. Or, correct the fault.
Fixing assembly
4) Try replacing the fixing assembly. Is the problem corrected?
YES: End.
NO:
COPYRIGHT© 2002 CANON INC.
the delivery tray A (No. 2 delivery slot)?
Go to step 3.
Correct the fault.
and wiring for the sensor normal?
• retry- sensor (PS152)
• registration paper sensor (PS101)
• delivery sensor (P103)
• No. 2 delivery sensors (PS201; for inner 2-way tray)
Replace the DC controller PCB.
2000 CANON iR1600/iR2000 REV.1 JAN. 2002
CHAPTER 13 TROUBLESHOOTING
13-51