CHAPTER 11 INSTALLATION
9) Mount the removed right cover, rear
cover, and right rear cover. (At this
time, do not tighten the screw at [14].)
When mounting the right cover,
take care so that the connector
of the harness will not be inside
the machine.
10) Connect the connector [10] of the
routed harness and the connector [12] of
the card reader.
Be sure to remove the shorting
connector [13]; otherwise, an
operation fault or error can oc-
cur.
12) Using the screw [14] that comes with
the unit, mount the card reader [15].
11-30
COPYRIGHT© 2002 CANON INC.
[13]
[12]
[10]
F11-402-07
2000
CANON iR1600/iR2000 REV.1 JAN. 2002
[15]
[14]