Selecting The Site Of Installation - Canon iR1600 Service Manual

Hide thumbs Also See for iR1600:

Table of Contents

1 Selecting the Site of Installation

The site must meet the following requirements; if possible, visit the user's before the de-

livery of the machine:

1. There must be a power outlet that may be used exclusively for the machine and rated as

indicated (±10%).

Do not use piping used for gas services to connect the grounding wire.

2. The site must be between 15° and 30°C (59° to 86°F) in temperature and between 10%

and 80% in humidity. Avoid areas near a water faucet, water boiler, humidifier, and re-

3. Avoid areas near a source of fire or areas subject to dust or ammonium gas. If exposed

to direct rays of the sun, provide curtains.

4. The level of ozone generated by the machine in sue should not affect the health of the

individuals around it. Some, nevertheless, find the odor unpleasant, requiring adequate

ventilation of the room.

5. The machine must remain level, its feet fully in contact with the floor.

CANON iR1600/iR2000 REV.1 JAN. 2002

CHAPTER 11 INSTALLATION

Show Quick Links

Table of Contents