Checking The Copy Images - Canon iR1600 Service Manual

CHAPTER 11 INSTALLATION

2.9 Checking the Copy Images

1) Connect the power cord to the AC out-
let, and turn on the power.
The power supply must be as
rated. (The voltage may be ±
10% of the rating, but it must
have the rated amperage.)
2) Place an original on the copyboard
glass, and make copies in cassette and
manual feed modes; then, check the
copy images. Also, make sure of the fol-
lowing:
• There is no abnormal noise.
• The image quality of copies made at
each default ratio is normal.
• As many copies as specified are made
normally.
11-20
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000 REV.1 JAN. 2002