Canon iR1600 Service Manual page 512

CHAPTER 3 DISASSEMBLY/ASSEMBLY
3) Remove the 4 screws [1], and detach
the network interface board.
1.3 Removing the Printer Board
1) Go to User Menu to TEST MENU, run
TEST PRINT, to output a test print.
2) If the machine has the network inter-
face board, got to User Menu to TEST
MENU, run PRINT EN CONFIG to
output the Ethernet configuration page.
3) Turn off the power switch.
If a hard disk or a network in-
terface board exists, be sure to
remove it in advance.
4) Remove the 13 screws [1], and detach
the rear over [2].
3 - 4
COPYRIGHT © 2002 CANON INC.
[1]
[2]
2001 2001 2001 2001 CANON Printer Board-N1/iN-E5 REV.0 JAN. 2002
[1]
[1]
F03-102-03
[1]
[1]
F03-103-01
[1]
[1]
[1]
[1]