4) Connect the network interface adapter to
the connector [1] of the printer board,
and secure it in place using 4 screws [2]
that come with the adapter. (Be sure to
use the screw equipped with a washer
for the PCB.)
5) As shown, connect the network inter-
face adapter and the image processor
PCB [2] with the USB cable [1] that
comes with the adapter. At that time,
be sure to keep the USB cable in place
using the cable clamp.
COPYRIGHT © 2002 CANON INC.
2001 2001 2001 2001
CANON Printer Board-N1/iN-E5 REV.0 JAN. 2002
CHAPTER 4 INSTALLATION
[2]
[1]
F04-202-03
[2]
F04-202-04
[2]
[1]
4-17