Image Pipeline Asic Error - Lexmark C93x Service Manual

5057-XXX
Step
3
Check the sensor (transparency detect) for proper
operation.
1. Enter the Diagnostics Menu.
2. Select BASE SENSOR TESTS.
3. Select Media path.
4. Select Transparency detect
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
4
Check the sensor (transparency detect) for proper
connection.
Is the above component properly connected?
5
Perform a POR.
Does the error remain when the power is turned off/on?
6
Perform a POR.
Does the error remain when the power is turned off/on
again?

841.00 Image pipeline ASIC error

Step
1
Perform a POR.
Does the error occur when the power is turned off/on?
2 Turn the printer off for 60 seconds.
Does the error occur when the power is turned off/on again?
2-58
Printer Service Manual
Check
Check
Yes
Go to step 5. Go to step 4.
Replace the Replace the
sensor connection.
(transparency
detect).
Go to "Sensor
(transparency
detect) removal"
on page 4-38.
Replace the lower Problem solved.
printer engine card
assembly.
"Lower
Go to
printer engine
card assembly
removal" on
page 4-82.
Replace the RIP Problem solved.
card assembly.
"RIP card
Go to
assembly
removal" on
page 4-75.
Yes
Go to step 2. Perform several
print tests.
If the problem
remains, go to
step 2.
Replace the RIP Problem solved.
card assembly.
"RIP card
Go to
assembly
removal" on
page 4-75.
No
No