Fuser Cooling Fan Removal - Lexmark C93x Service Manual

5057-XXX
5. Remove the 5V LVPS card bracket assembly. See
6. Remove the transfer belt drive motor cooling fan. See
page 4-83.
7. Remove the transfer belt drive motor assembly. See
page 4-84.
8. Remove the K developer transport drive motor assembly. See
removal" on page
9. Remove the two connectors from the CMYK PC cartridge drive motor assembly (A).
10. Release the hook securing the access cover (B) to the machine.
11. Remove the access cover (B).
12. Remove the two screws securing the socket (C) to the machine.
13. Detach the socket (C) from the machine.
Note: The lower left screw can be accessed through the hole in the frame where the socket (B) was detached in
step 7.
14. Remove the eight screws securing the CMY PC cartridge drive motor assembly (A) to the machine.
15. When removing the CMYK PC cartridge drive motor assembly (A), ensure none of the harnesses become
damaged.
16. Remove the CMYK PC cartridge drive motor assembly (A).

Fuser cooling fan removal

1. Remove the top cover assembly. See
2. Disconnect the connector from the fuser cooling fan (A).
3. Remove the harness from the clamps.
4. Lift the fuser cooling fan (A).
4-92
Printer Service Manual
4-97.
Connector
B
C
"Top cover assembly removal" on page
"5V LVPS card bracket assembly removal" on page
"Transfer belt drive motor cooling fan removal" on
"Transfer belt drive motor assembly removal" on
"K developer / transport drive motor assembly
Connector
A
Screwdriver
access hole
4-88.
4-4.