5057-XXX
Waste toner cartridge nearly full
Step
1
Check the waste toner cartridge.
Is the above component properly installed?
2
Check the sensor (waste toner cartridge full) for proper
operation.
1. Enter the Diagnostics Menu.
2. Select BASE SENSOR TEST.
3. Select Exit level.
4. Select Standard bin full 1.
Does the display on the operator panel, change every time
the sensing area of the above sensor is interrupted or
blocked?
3
Check the sensor (waste toner cartridge full) connection.
Is the above component properly connected?
4
Perform a POR.
Does the error remain when the power is turned off/on
again?
(Color) PC cartridge not detected
Step
1
Check the appropriate PC cartridge.
Is the above component properly installed?
2
Replace the appropriate PC cartridge.
Does the error remain?
3
Perform a POR.
Does the error remain when the power is turned off/on
again?
2-120
Printer Service Manual
Check
Check
Yes
Go to step 2.
Reinstall the waste
toner cartridge.
Go to step 5.
Go to step 3.
Replace the
Replace the
sensor (waste
connection.
toner cartridge
full).
"Sensor
Go to
(waste toner
cartridge full)
removal" on
page
4-40.
Replace the upper
Problem solved.
printer engine card
assembly.
"Upper
Go to
printer engine
card assembly
removal" on
page
4-79.
Yes
Go to step 2.
Reinstall the
appropriate PC
cartridge.
Go to
cartridge unit
removal" on
page
Go to step 3.
Problem solved.
Replace the upper
Problem solved.
printer engine card
assembly.
"Upper
Go to
printer engine
card assembly
removal" on
page
4-79.
No
No
"PC
4-43.