5057-XXX
904.07 CMY transfer roll retract motor time out
Step
1
Perform a POR.
Does the error occur when the power is turned off/on?
2
Replace the transfer belt unit assembly. Go to
belt unit assembly removal" on page
Does the error remain?
905.00 NVM read/write cannot be executed error
Step
1
Perform a POR.
Does the error occur when the power is turned off/on?
2
Turn the printer off for 60 seconds.
Does the error occur when the power is turned off/on again?
3
Perform a POR.
Does the error occur when the power is turned off/on?
905.01 Marking device video error
Step
1
Perform a POR.
Does the error occur when the power is turned off/on?
2-76
Printer Service Manual
Check
"Transfer
4-16.
Check
Check
Yes
Go to step 2.
Perform several
print tests.
If the problem
remains, go to
step 2.
Replace the lower
Problem solved.
printer engine card
assembly.
Go to
"Lower
printer engine
card assembly
removal" on
page
4-82.
Yes
Go to step 2.
Perform several
print tests.
If the problem
remains, go to
step 2.
Replace the
Problem solved.
printer engine card
assembly.
"Upper
Go to
printer engine
card assembly
removal" on
page
4-79.
Go to step 3.
Replace the RIP
Problem solved.
card assembly.
"RIP card
Go to
assembly
removal" on
page
4-75.
Yes
Replace the upper
Problem solved.
printer engine card
assembly.
Go to
"Upper
printer engine
card assembly
removal" on
page
4-79.
No
No
No