Sensor (Tray 2 Feed-Out) Late Jam (Feeding From Tray) - Lexmark C93x Service Manual

5057-XXX
Step
9
Perform a print test.
Does the error continue?
10 Perform a print test.
Does the error continue?
243.01 Sensor (tray 2 feed-out) late jam (feeding from tray 3)
Step
1
Check the media condition.
Is the media in the tray crumpled or damaged?
2
Check the media position.
Does the media touch the sensor (tray 2 feed-out)?
3
Check the sensor (tray 2 feed-out) for proper operation.
1. Enter the Diagnostics Menu.
2. Select INPUT TRAY TESTS.
3. Select Sensor test.
4. Select Tray 2.
5. Select Feed-out.
Does the display on the operator panel, change every
time the sensing area of the above sensor is interrupted
or blocked?
4
Check the sensor (tray 2 feed-out) for proper
connection.
Is the above component properly connected?
2-42
Printer Service Manual
Check
Check
Yes
Replace the 1TM Problem solved.
controller card
assembly or the 3TM
controller card
assembly or the TTM
controller card
assembly.
Go to "1X 500-
sheet drawer
(1TM)–1TM
controller card
assembly removal"
on page 4-203"3X
500-sheet drawer
(3TM)–3TM
controller card
assembly removal"
on page 4-183 or
"2000-sheet dual
input (TTM)–TTM
controller card
assembly removal"
on page 4-157.
Go to step 10.
Replace the lower Problem solved.
printer engine card
assembly.
"Lower
Go to
printer engine card
assembly removal"
on page 4-82.
Yes
Replace the Go to step 2.
damaged media with
new.
Remove the media. Go to step 5
Go to step 5. Go to step 4.
Replace the sensor Replace the
(tray 2 feed-out). connection.
No
No