Panel Menus; Ppds Emulation - Lexmark C93x Service Manual

5057-XXX
To change the value of this setting:
1. Select SIZE SENSING from the Configuration Menu. The screen displays each size sensing equipped
input source and its current Size Sensing value.
2. Select Back to cancel and return to the Configuration Menu.
3. Select to save the change.
Turning off auto size sensing is not selectable on this machine.
A5/Statement
Due to engine limitations, Trays 1 through 4 cannot simultaneously sense A5- and statement-size paper. The
value of this setting determines which of the two paper sizes these trays will sense automatically. This setting
will apply to all automatic trays, but not to the MP Feeder. The MP Feeder can support these paper sizes
regardless of the value of this setting.
B5/Executive
Due to engine limitations, Trays 1 through 4 cannot simultaneously sense executive and JIS-B5-size paper. The
value of this setting determines which of the two paper sizes these trays will sense automatically. This setting
will apply to all automatic trays, but not to the MP Feeder. The MP Feeder can support these paper sizes
regardless of the value of this setting.

Panel Menus

Selections are to Disable or Enable (default) operator panel menus.
To change the value of this setting:
1. Select Panel Menus from the Configuration Menu.
2. Select Back to cancel and return to the Configuration Menu.
3. Select to save the change.

PPDS Emulation

The value of the PPDS Emulation menu item determines if a device can recognize and use the PPDS data
stream. The current value of this setting appears in parentheses to the right of the setting on the Configuration
Menu screen.
The following table indicates how the value of this setting affects the user default value for the Smartswitch and
Printer Language settings:
Value of
PPDS
Emulation
setting
Activate
Deactivate
To change the value of this setting:
1. Select PPDS Emulation from the Configuration Menu.
2. Select Back to cancel and return to the Configuration Menu.
3. Select to save the change.
3-26
Printer Service Manual
Resulting value of
Smartswitch setting Resulting value for Printer Language settings
(all ports)
Off PPDS Emulation
Note: You can still switch languages on the operator panel or through
the PJL ENTER LANGUAGE command.
On Printer's factory default value