Sensor Static Jam - Lexmark C93x Service Manual

Step
10
Check the Replace the K developer/transport drive motor
assembly for proper operation.
1. Enter the Diagnostics Menu.
2. Select MOTOR TESTS.
3. Select Printer Motor Test.
4. Select K developer/transport drive motor.
Does the above component operate properly?
11
Check the Replace the K developer/transport drive motor
assembly for proper connection.
Is the above component properly connected?
12 Perform a print test.
Does the error continue?

200.02 Sensor static jam

Step
1 Check the media position in the area shown on the operator
panel.
Is media present in the area shown on the operator panel?
2 Check the sensor in the appropriate area for proper
operation.
1. Enter the Diagnostics Menu.
2. Select BASE SENSOR TEST.
3. Select Media Path.
4. Select Registration.
Does the display on the operator panel, change every time
the sensing area of the appropriate sensor is interrupted or
blocked?
3 Check the appropriate sensor for proper connection.
Is the above component properly connected?
Check
Caution: When performing motor tests,
ensure that all cover and door interlock
switches are overridden.
Check
Yes
Go to step 12. Go to step 11.
Replace the K Replace the
developer/ connection.
transport drive
motor assembly.
"K
Go to
developer /
transport drive
motor assembly
removal" on
page 4-97.
Replace the lower Problem solved.
printer engine card
assembly.
Go to "Lower
printer engine
card assembly
removal" on
page 4-82.
Yes
Remove the Go to step 2.
media.
Go to step 4. Go to step 3.
Replace the Replace the
appropriate connection.
sensor.
Diagnostic information
5057-XXX
No
No
2-25