Printer Setup; Defaults; Page Counts; Serial Number - Lexmark C93x Service Manual

Color laser printer
Table of Contents

Advertisement

5057-XXX

PRINTER SETUP

To enter the PRINTER SETUP screen, select PRINTER SETUP from the Diagnostics Menu.
PRINTER SETUP values appear on the LCD. If required, reset the values and submit.

Defaults

The value of this setting determines whether the printer uses the US or Non-US factory default value for the
printer settings listed below:
Printer Setting
Paper Sizes
(applies only to input sources which do not have hardware size
sensing capability)
Envelope Size
(applies only to envelope feeding sources which do not have
hardware size sensing capability)
PCL Symbol Set
PPDS Code Page
Universal Units of Measure
Select Submit to change the value of this setting, then the LCD returns to the Diagnostics menu. To return to the
PRINTER SETUP menu without changing the value of this setting, select Back.

PAGE COUNTS

Prt Color Pg Count
Prt Mono Pg Count
Perm Page Count
The value of these settings enables you to gauge the amount of usage on a device.
The Printed Page Count cannot be reset by the servicer.

Serial Number

This printer setting records the printer's serial number that was assigned by the manufacturer. When you select
this setting, a replica of a keyboard appears on the LCD that enables you to edit the serial number.

Engine Setting 1 to 4

These settings are used by Engine code ECs to fix field problems.
Warning: Do not change these settings unless requested to do so by your next level of support.

Model Name

The model name can only be viewed and cannot be changed.

Configuration ID

The two configuration IDs are used to communicate information about certain areas of the printer that cannot be
determined using hardware sensors. The configuration IDs are originally set at the manufacturer, however you
may need to reset Configuration ID 1 or Configuration ID 2 when you replace the printer engine card assembly.
This printer uses two Configuration IDs, each of which consists of eight digits. The first seven digits in each ID
are hexadecimal numbers, while the last digit is a checksum of the preceding seven hexadecimal digits. Each ID
can contain a combination of the digits 0 through 9 and the characters A to F.
3-16
Printer Service Manual
US Value
Non-US Value
Letter
A4
10 Envelope
DL Envelope
PC-8
PC-850
437
850
Inches
Millimeters

Advertisement

Table of Contents
loading

This manual is also suitable for:

C93 seriesC935

Table of Contents