General Copy Operation - Konica Minolta bizhub C200 User Manual

Basic copy operations
2 Basic copy operations
2.1

General copy operation

This section contains information on the general operation for making copies.
The following procedure describes how to copy a single-sided original using basic copy operations.
Note
With software switch settings (mode 403), whether or not to permit use of Copy mode functions can be
specified. For details on the software switch settings, refer to the User's Guide [Network Administrator].
Some settings cannot be used together. For details on the settings that cannot be combined, refer to
"Operations that cannot be combined" on page
The maximum number of copies that can be made at one time can be specified. For details on specifing
the setting, refer to
1
Press the [Copy] key to display the Basic screen in Copy mode.
2
Position the original to be copied.
– For details on positioning the original, refer to
3
Specify the desired copy settings.
C200
"Specifying settings for Security Settings" on page
2-5.
11-39.
page 2-7.
2
2-2