Table of Contents
Advertisement
Chapter 5. Setting up the Wired Connection for Windows 7
To make the N1000 IP camera work together with your computer, your laptop and other
devices in a local network, you need to connect this camera to the network according to the
network parameters. This chapter explains how to define the network parameters.
NOTE:
The connection establishment process is shown for Windows 7 Ultimate. Despite titles of system menus
and options may differ from the titles of system menus and options that appear in other versions of
Windows, the connection establishment process is universal.
5.1. Defining the Local Network Parameters
When connecting the camera using an Ethernet cable, you need to define the local network
parameters.
To do so, go to Start – Control Panel (Pic. 5.1).
In the opened window, click on the [View network status and tasks] in the [Network and
Internet] section (Pic. 5.2).
N1000 Installation User Manual
Chapter 5. Setting Up the Wired Connection for Windows 7
Pic. 5.1
12
Advertisement
Table of Contents
