Please Keep In Mind; Global Prefix/Suffix; Example: Setting A Prefix - Datalogic PowerScan PBT7100 Product Reference Manual

Data Editing

Please Keep In Mind...

•
•
•
•

Global Prefix/Suffix

Up to 20 ASCII characters may be added as a prefix (in a position before the barcode
data) and/or as a suffix (in a position following the barcode data) as indicated in
Figure 5. Prefix and Suffix Positions

Example: Setting a Prefix

In this example, we'll set a prefix for all symbologies.
1. Determine which ASCII character(s) are to be added to scanned barcode data. In this
2. Scan the ENTER/EXIT barcode.
3. Scan the SET GLOBAL PREFIX barcode.
4. Reference the ASCII Chart on the inside back cover of this manual, to find the hex value
5. If less than the expected string of 20 characters are selected, scan the ENTER/EXIT bar-
96
Modifying a message string is not a mandatory requirement. Data editing is sophisticated
feature allowing highly customizable output for advanced users. Factory default settings
for data editing is typically set to NONE.
A prefix or suffix may be applied (reference the
across all symbologies (set via the Global features in this chapter).
You can add any character from the
of this manual as a prefix, suffix or Label ID.
Enter prefixes and suffixes in the order in which you want them to appear on the output.
Prefix Label ID AIM ID
example, we'll add a dollar sign ('$') as a prefix.
assigned to the desired character. The corresponding hex number for the '$' character is
24. To enter this selection code, scan the '2' and '4' barcodes from
pad.
If you make a mistake before the last character, scan the CANCEL barcode to
abort and not save the entry string. You can then start again at the beginning.
NOTE
code to terminate the string.
Symbologies
ASCII Chart (from 00-FF) on the inside back cover
OR...
Bar Code Data Label ID
00 - 20 Characters (ASCII)
AND
OR
chapter for these settings)
Figure 5
Suffix
Appendix E, Key-
PowerScan® PBT7100 Cordless
.