Setting The Camera Link Mode - Dalsa 4M30 User Manual

Falcon 4M Camera Manual
4M60 Data Readout Configurations
Camera Link Mode Configuration (Controlled by clm
command)
Command
clm 2
clm 3
clm 15
clm 16

3.3.2 Setting the Camera Link Mode

Purpose:
Syntax:
Syntax Elements:
Notes:
Example:
DALSA
Camera Link Camera Link Taps
Configuration
Base 2 Camera Link taps
where:
1 = Taps 1+3
2 = Taps 2+4
Base 2 Camera Link taps
where:
1 = Taps 1+3
2 = Taps 2+4
Medium 4 Camera Link taps
where:
1 = Tap 1
2 = Tap 2
3 = Tap 3
4 = Tap 4
Medium 4 Camera Link taps
where:
1 = Tap 1
2 = Tap 2
3 = Tap 3
4 = Tap 4
Sets the camera's Camera Link configuration, number of Camera
Link taps and data bit depth. Refer to the tables above for a
description of each Camera Link mode.
clm m
m
Output mode to use:
2: Base configuration, 2 taps, 8 bit output
3: Base configuration, 2 taps, 10 bit output
15: Medium configuration, 4 taps, 8 bit output (4M60 only)
16: Medium configuration, 4 taps, 10 bit output (4M60 only)
•
To retrieve the current Camera Link mode, use the
command
gcp
•
For details on line times and frame readout times when
using a window of interest, refer to following table.
clm 3
Pixel Rate
Configuration
(Controlled by
command)
sot
Bit
Depth
8 = 65
sot 130
MHz strobe
= 80
sot 160
MHz strobe
10 = 65
sot 130
MHz strobe
= 80
sot 160
MHz strobe
8 = 65
sot 260
MHz strobe
sot
= 80 MHz
320
strobe
10 = 65
sot 260
MHz strobe
= 80
sot 320
MHz strobe
03-032-20044-01
25