After selecting Peripherals the following dialog box appears:
The following parameters can be set (Use the TAB keys to jump between items and
select/deselect an highlighted option by pressing the space bar):
Select base address for serial port I
Automatic assignment at start-up
Select address and interrupt
Not active
Select base address for serial port 2
Automatic assignment at start-up
Select address and interrupt
Not active
Auto
3F8h, IRQ4.
2F8h, IRQ3
3E8h, IRQ4
2E8h, IRQ3
Disable
Auto
3F8h, IRQ4
2F8h, IRQ3
3E8h, IRQ4
2E8h, IRQ3
Disable