Page 1
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 PER-C102 Marvell 88E8036/52/53, Dual PCI Express 10/100/1000 Ethernet DaughterBoard PER-C102 Rev. A Manual 2nd Ed. Oct. 2005...
Page 2
AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
Page 3
Conductive Bubble Bag • Accessory for jumpers • Flat Cable (with COM port version only) • PER-C102 DaughterBoard • Quick Installation Guide • CD-ROM for manual (in PDF format) and drivers If any of these items should be missing or damaged, please...
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Features ..............1-3 1.3 Specifications ............
AAEON SBC (Single Board Computer), but also provides lifetime support. In addition, the PER-C102 can work with other AAEON full-size SBC, half-size SBC and firewall systems. You do not have to adopt another solution to fulfill your expansion requirements, and it allows you to keep a consistent solution.
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 1.2 Features 1. Dual PCI Express Host Interface 2. Dual 10/100 or 10/100/1000Base-T Triple-speed Ethernet Controller 3.
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 1.3 Specifications System Chipset: PCI Express 10/100 or 10/100/1000Mb LAN optional RJ-45 x 2, Marvell 88E8036/88E8052/88E8053 Expansion Interface: Dual PCI Express x 1 (DF-13,...
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 Chapter Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of the user manual.
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it.
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers.
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 2.7 LAN1, LAN2 Enable/Disable (JP1, JP2) JP1, JP2 Function LAN Disable Close LAN Enable Open...
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 2.11 PCI Express Connector (CN3) Signal Signal +3.3V PCIe-RX1 +3.3V PCIe-RX1# PCIe-WAKE# PCIe-RST# PCIe-CLK1...
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 Chapter Driver Installation Chapter 3 Driver Installation...
Page 18
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 The PER-C102 comes with a CD-ROM that contains all drivers your need.
Page 19
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 3.1 Driver Installation: Insert the PER-C102 CD-ROM into the CD-ROM Drive. And install the driver. Install Dual PCI Express 10_100_1000 Ethernet Daughterboard Driver.
E t h e r n e t D a u g h t e r b o a r d P E R - C 1 0 2 3.2 Wake-On-LAN Installation: Please follow the steps below to activate the Wake-On-LAN function.