Aaeon PCM-4330 Instructions Manual page 35

Special SVGA software (drivers and programs) is included with the PCM-4330
single board computer to use the extended functions under MS-DOS. Operation of
the SVGA adapter is also possible without this SVGA software.
The SVGA software for use with MS-DOS is found on the disk labeled DOS Install
Disk. The following files are included on this disk:
README.TXT
README.1ST
ACAD.LIF
CADVANCE.LIF
GENERIC.LIF
LOTUS.LIF
PCAD.LIF
WORD.LIF
WP.LIF
UTILITY. LIF
INSTALL. COM
CHIPTST. EXE
KDINSTAL. EXE
READID.EXE
VGAMODE.EXE
If the system does not operate as anticipated after the installation
of a MS-DOS device driver, please refer to Appendix
A:Troubleshooting.
Lists all drivers and programs on the disk
(If included on the disk) Contains last-minute informa-
tion and change remarks
AutoCAD 386, AutoShade and 3D Studio display driver
Cadvance display driver
Generic CADD display driver
Lotus 1-2-3 and Lotus Symphony display driver
PCAD display driver
Microsoft Word for MS-DOS display driver
WordPerfect display driver
ANSI.SYS driver for extended VGA mode (Paradise
Mode)
Menu controlled installation program
(used by INSTALL.COM)
(used by INSTALL.COM)
(used by INSTALL.COM)
(used by INSTALL.COM)