Table of Contents
Advertisement
The following section contains an excerpt of supported LC-displays with
reference tables assigning individual pins of the universal LCD connector on
the PCM-4330 board to signal lines of several LC-displays and indicating
proper configuration switch settings.
Please contact your PCM-4330 dealer if you cannot find your LC-display in
the following lists and ask for the LCD-Connector manual, which contains
constantly updated lists of all supported displays and further configuration details
and notes.
Configuration Switches
A row of configuration switches (DIL-switches) on the PCM-4330 board is
used to select the connected LC-display. The individual keys of the configu-
ration switches are assigned the following function:
SW.1
SW.2
SW.3
SW.4
SW.5
SW.6
SW.7
SW.8
Please refer to figure 4 on page 14 for the location of these switches.
Mono Dual-Scan Display 8 Bit
reserved
Color Dual-Scan Display 16 Bit
Color Dual-Scan Display 16 Bit
reserved
reserved
reserved
reserved
reserved
reserved
(reserved)
Toggle between CRT and CRT/LCD simultaneous operation
on:
CRT only
off:
CRT and LCD simultaneously
Panel Technology 0
Panel Technology 1
Display Configuration 0
Display Configuration 1
Display Configuration 2
Display Configuration 3
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
Advertisement
Table of Contents
