Aaeon PCM-4330 Instructions Manual page 15

Before installing the PCM-4330 PC/104 board computer please read the follow-
ing notes very carefully. You must adhere to these rules to avoid damaging compo-
nents:
Before touching the board or any other component, discharge your body by
touching a grounded object such as the metal chassis of the computer.
Tools used to install the board must be free of static charges.
Always remove the power cord from the system before installing or removing
components.
Handle the board carefully, holding it by its edges only.
Do not touch components on the board, connecting pins, or exposed circuits on
the board.
The PCM-4330 is installed in a PC/104 system taking over all functions of a mod-
ern ISA-compatible computer system.
Please observe all notes listed above before installing the module.
If the system does not operate as anticipated after installation, please
refer to Appendix A: Troubleshooting.