Table of Contents
Advertisement
After pressing the CTRL-ALT-ESC keys, the following menu is displayed:
The following selections are available in the setup menu:
This selection displays a screen with help message and instructions on how to use
list boxes and radio buttons.
Use this option to reset current settings to factory default values.
Use this selection to set time and date.
This selection offers automatic detection and manual drive parameter configuration
of IDE-/AT-Bus hard disk drives connected to the primary (on-board) and second-
ary IDE-Controller. If using the BIOS automatic detection, several drive types may
be available. Extended modes for IDE hard disk with a capacity of more than 528
MB are supported by the BIOS.
Select type of floppy disk drives installed.
Advertisement
Table of Contents
