Aaeon PCM-8150 Manual
  1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Computer Hardware
  5. PCM-8150
  6. Manual

Aaeon PCM-8150 Manual

Intel ulv celeron m 600mhz, 1.8ghz processors compact board with lvds, 10/100 ethernet, 6 channel audio & mini pci
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
C o m p a c t B o a r d
P C M - 8 1 5 0
PCM-8150
®
®
Intel
ULV Celeron
M
600MHz, 1.8GHz Processors
Compact Board
With LVDS, 10/100 Ethernet,
6 Channel Audio & Mini PCI
PCM-8150 Rev. A Manual 2nd Ed.
Jan. 2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PCM-8150 and is the answer not in the manual?

Questions and answers

Related Manuals for Aaeon PCM-8150

Summary of Contents for Aaeon PCM-8150

  • Page 1 C o m p a c t B o a r d P C M - 8 1 5 0 PCM-8150 ® ® Intel ULV Celeron 600MHz, 1.8GHz Processors Compact Board With LVDS, 10/100 Ethernet, 6 Channel Audio & Mini PCI PCM-8150 Rev. A Manual 2nd Ed. Jan. 2006...
  • Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 C o m p a c t B o a r d P C M - 8 1 5 0 Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™...
  • Page 4 P C M - 8 1 5 0 Packing List Before you begin installing your card, please make sure that the following materials have been shipped: • 1 PCM-8150 CPU Card • 1 Quick Installation Guide • 1 CD-ROM for manual (in PDF format) and drivers •...

  • Page 5: Table Of Contents

    C o m p a c t B o a r d P C M - 8 1 5 0 Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Features ..............1-4 1.3 Specifications ............1-5 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ............
  • Page 6 C o m p a c t B o a r d P C M - 8 1 5 0 2.18 Audio Connector (CN8)........... 2-15 2.19 LAN LED Connector (CN9) ........2-15 2.20 COM 1/2/3/4 Connector (CN10)......2-16 2.21 CPU Fan Connector (CN11) ........2-17 2.22 Digital I/O-1 Connector (CN12) Address=801H ..
  • Page 7 C o m p a c t B o a r d P C M - 8 1 5 0 A.3 IRQ Mapping Chart ..........A-4 A.4 DMA Channel Assignments........A-4 Appendix B Programming The Watchdog Timer B.1 Programming ............B-2 B.2 IT8712 Watchdog Timer Initial Program ....B-7...

  • Page 8: Chapter 1 General Information

    C o m p a c t B o a r d P C M - 8 1 5 0 Chapter General Information Chapter 1 General Information...

  • Page 9: Introduction

    (5V only workable) The PCM-8150 supports system memory up to 1GB with fast DDR 266MHz providing high calculate and graphic ability but with extreme low power consumption. This feature is especially suitable for Video, Automation controller, Multimedia application.
  • Page 10 And onboard Intel 82551 Ethernet controller stands for 10/100Mbps transferring speed. The PCM-8150 is the ideal choice for high performance and energy saving demands that implement with low power consumption and pleasant multimedia presentations. For environment-friendly applications, The PCM-8150 no doubt is a perfect fit.

  • Page 11: Features

    C o m p a c t B o a r d P C M - 8 1 5 0 1.2 Features • ® ® ® Supports Intel Pentium M / Celeron M or onboard ® ® ULV Intel Celeron Processor at 600MHz •...

  • Page 12: Specifications

    C o m p a c t B o a r d P C M - 8 1 5 0 1.3 Specifications System • CPU: ® ® Onboard ULV Intel Celeron Processor at 600MHz or Socket ® ® 478 Intel Pentium ®...
  • Page 13 C o m p a c t B o a r d P C M - 8 1 5 0 Display ® Chipset: Intel 852GM + Chrontel 7009 Memory size: Shared System Memory Up to 64MB with DVMT Resolutions: Up to 1280 x 1024 @ 32bpp Colors for CRT;...
  • Page 14 C o m p a c t B o a r d P C M - 8 1 5 0 Mechanical and Environment Dimension: 8”(L) x 5.75”(W) (203mmx146mm) Weight: 1.2lb (0.5kg) Operation Temp: 32°F~140°F (0°C~60°C) Battery: Lithium battery Power Supply Voltage: +5V. AT/ATX Chapter 1 General Information 1 - 7...

  • Page 15: Chapter 2 Quick Installation Guide

    C o m p a c t B o a r d P C M - 8 1 5 0 Chapter Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of user manual. For other chapters further installation instructions, please refer to the user...

  • Page 16: Safety Precautions

    C o m p a c t B o a r d P C M - 8 1 5 0 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components.

  • Page 17: Location Of Connectors And Jumpers

    C o m p a c t B o a r d P C M - 8 1 5 0 2.2 Location of Connectors and Jumpers Component Side CN10 USB1 USB2 DIMM1 LPT1 PCI1 FDD1 MPCI1 CN16 Type I: Socket 478 CPU Chapter 2 Quick Installation Guide 2 - 3...
  • Page 18 C o m p a c t B o a r d P C M - 8 1 5 0 CN10 USB1 USB2 DIMM1 LPT1 PCI1 FDD1 MPCI1 CN16 NOTE: The Height of Cooling System Depends on Customer Cooling Device. Type II: Onboard CPU Chapter 2 Quick Installation Guide...
  • Page 19 C o m p a c t B o a r d P C M - 8 1 5 0 Solder Side PCMCI1 CFD1 Chapter 2 Quick Installation Guide 2 - 5...

  • Page 20: Mechanical Drawing

    C o m p a c t B o a r d P C M - 8 1 5 0 2.3 Mechanical Drawing Component Side 138.43 140.97 137.54 137.53 135.89 135.89 133.91 127.64 126.73 128.64 136.51 126.99 115.29 99.82 97.16 96.52 91.44 76.01...
  • Page 21 C o m p a c t B o a r d P C M - 8 1 5 0 Solder Side (13.75) (1.60) 135.89 135.89 119.99 68.82 58.10 18.82 (8.60) 0.00 0.00 5.08 Chapter 2 Quick Installation Guide 2 - 7...

  • Page 22: List Of Jumpers

    C o m p a c t B o a r d P C M - 8 1 5 0 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application. The table below shows the function of each of the board's jumpers: Jumpers Label...

  • Page 23: List Of Connectors

    C o m p a c t B o a r d P C M - 8 1 5 0 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application. The table below shows the function of each board's connectors: Connectors Label...
  • Page 24 C o m p a c t B o a r d P C M - 8 1 5 0 USB1 USB 0/1Connector USB2 USB 2/3 Connector LAN1 10/100 Base-TX Ethernet Connector PCI1 PCI Slot MPCI1 Mini PCI Slot PCMCIA1 PCMCIA Slot DIMM1 DDR DIMM Slot...

  • Page 25: Setting Jumpers

    C o m p a c t B o a r d P C M - 8 1 5 0 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers. A jumper is the simplest kind of electric switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them.

  • Page 26: Atx Emulation At Power Selection (Jp1)

    C o m p a c t B o a r d P C M - 8 1 5 0 2.7 ATX Emulation AT Power Selection (JP1) Function ATX (Default) 2.8 Audio Out Selection (JP2) Function 1-3, 2-4 W/O Amplifier 3-5, 4-6 W/ Amplifier (Default) 2.9 LCD Voltage Selection (JP3)

  • Page 27: Clear Cmos (Jp6)

    C o m p a c t B o a r d P C M - 8 1 5 0 2.12 Clear CMOS (JP6) Function Protected (Default) Clear 2.13 TV_Out Connector (CN1) Signal Signal CVBS N.C. N.C. 2.14 Audio SPDIF Connector (CN2) Signal Signal Front-R...

  • Page 28: Atx Power Connector (Cn5)

    C o m p a c t B o a r d P C M - 8 1 5 0 LVDS_TXL0(-) LVDS_TXL0(+) LVDS_TXL1(-) LVDS_TXL1(+) LVDS_TXL2(-) LVDS_TXL2(+) LVDS_TXL3(-) LVDS_TXL3(+) LVDS_DDCPDATA LVDS_DDCPCLK LVDS_TXU0(-) LVDS_TXU0(+) LVDS_TXU1(-) LVDS_TXU1(+) LVDS_TXU2(-) LVDS_TXU2(+) LVDS_TXU3(-) LVDS_TXU3(+) PPVCC_1 LVDS_TXUCLK(-) LVDS_TXUCLK(+) 2.16 ATX Power Connector (CN5) Signal...

  • Page 29: Audio Connector (Cn8)

    C o m p a c t B o a r d P C M - 8 1 5 0 DVI_TDC(+) DVI_TDC(-) HPDET DVI_TD2(+) DVI+TD2(-) DVI_TD0(+) DVI_TD0(-) N.C. N.C. MDVI_DATA MDVI_CLK 2.18 Audio Connector (CN8) Signal Signal MIC IN MIC +2.5V LINE_IN_GND CD_GND LINE_IN_L...

  • Page 30: Com 1/2/3/4 Connector (Cn10)

    C o m p a c t B o a r d P C M - 8 1 5 0 2.20 COM 1/2/3/4 Connector (CN10) Signal Signal DCD1 DSR1 RXD1 RTS1 TXD1 CTS1 DTR1 N.C. DCD2 DSR2 (422TXD-/485DATA-) (422/485) RXD2 (422RXD+) RTS2 TXD2 CTS2...

  • Page 31: Cpu Fan Connector (Cn11)

    C o m p a c t B o a r d P C M - 8 1 5 0 2.21 CPU Fan Connector (CN11) Signal Speed Sense 2.22 Digital I/O-1 Connector (CN12) Address=801H Signal Signal DIO2-1 DIO2-2 DIO2-3 DIO2-4 DIO2-5 DIO2-6 DIO2-7...

  • Page 32: Irda Connector (Cn17)

    C o m p a c t B o a r d P C M - 8 1 5 0 2.25 IrDA Connector (CN17) Signal N.C. IRRX IRTX 2.26 Internal Keyboard and Mouse Connector (CN18) Signal Signal KB DATA KB CLK MS_DATA MS_CLK N.C.

  • Page 33: Eide Connector (Ide1)

    C o m p a c t B o a r d P C M - 8 1 5 0 # INDEX # MOTOR A # DRIVE SELECT B # DRIVE SELECT A # MOTOR B # DIR # STEP # WRITE DATA # WRITE GATE # TRACK0...

  • Page 34: Vga Display Connector (Vga1)

    C o m p a c t B o a r d P C M - 8 1 5 0 IO WRITE IO READ IO READY DACK IRQ14 N.C. ADDR1 UDMA DETECT ADDR0 ADDR2 CS#1 CS#3 2.30 VGA Display Connector (VGA1) Signal Signal VGAVCC...

  • Page 35: Usb Connector (Usb1)

    C o m p a c t B o a r d P C M - 8 1 5 0 DATA4 DATA5 DATA6 DATA7 #ACK BUSY SELECT N.C. 2.32 USB Connector (USB1) Signal Signal USBD0(-) USBD0(+) USBD1(+) USBD1(-) 2.33 USB Connector (USB2) Signal Signal USBD2(-)

  • Page 36: Chapter 3 Award Bios Setup

    C o m p a c t B o a r d P C M - 8 1 5 0 Chapter Award BIOS Setup Chapter 3 Award BIOS Setup...
  • Page 37 3. The CMOS memory has lost power and the configuration information has been erased. The PCM-8150 CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.
  • Page 38 C o m p a c t B o a r d P C M - 8 1 5 0 3.2 Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
  • Page 39 C o m p a c t B o a r d P C M - 8 1 5 0 Use this menu to change the values in the chipset registers and optimize your system performance. Integrated Peripherals Use this menu to specify your settings for integrated peripherals.
  • Page 40 Save CMOS value changes to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup. You can refer to the "AAEON BIOS Item Description.pdf" file in the CD for the meaning of each setting in this chapter.

  • Page 41: Chapter 4 Driver Installation

    C o m p a c t B o a r d P C M - 8 1 5 0 Chapter Driver Installation Chapter 4 Driver Installation...
  • Page 42 OS Support For Microsoft Windows 2000, ® Windows XP only The PCM-8150 comes with a CD-ROM that contains most of drivers and utilities of your needs. Please follow the sequence below to install the drivers: ® Step 1 – Install Intel Chipset Software Installation Utility ®...
  • Page 43 C o m p a c t B o a r d P C M - 8 1 5 0 4.1 Installation: Insert the PCM-8150 CD-ROM into the CD-ROM Drive. And install the drivers from Step 1 to Step 4 in order. ®...
  • Page 44 C o m p a c t B o a r d P C M - 8 1 5 0 path where you want the unzipped files place on and then click on Unzip button. Click on Start, Settings, Control Panel and System button in order.

  • Page 45: Appendix A I/O Information

    C o m p a c t B o a r d P C M - 8 1 5 0 Appendix I/O Information Appendix A I/O Information...

  • Page 46: I/O Address Map

    C o m p a c t B o a r d P C M - 8 1 5 0 A.1 I/O Address Map Appendix A I/O Information...

  • Page 47: Memory Address Map

    C o m p a c t B o a r d P C M - 8 1 5 0 A.2 Memory Address Map Appendix A I/O Informaion...

  • Page 48: Irq Mapping Chart

    C o m p a c t B o a r d P C M - 8 1 5 0 A.3 IRQ Mapping Chart A.4 DMA Channel Assignments Appendix A I/O Information...

  • Page 49: Appendix B Programming The Watchdog Timer

    C o m p a c t B o a r d P C M - 8 1 5 0 Appendix Programming the Watchdog Timer Appendix B Programming the Watchdog Timer...

  • Page 50: Programming

    C o m p a c t B o a r d P C M - 8 1 5 0 B.1 Programming PCM-8150 utilizes ITE 8712 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and...
  • Page 51 C o m p a c t B o a r d P C M - 8 1 5 0 There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers;...
  • Page 52 C o m p a c t B o a r d P C M - 8 1 5 0 of the key-check logic, it is necessary to perform four write opera-tions to the Special Address port (2EH). Two different enter keys are provided to select configuration ports (2Eh/2Fh) of the next step.
  • Page 53 C o m p a c t B o a r d P C M - 8 1 5 0 WatchDog Timer Configuration Registers Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require...
  • Page 54 C o m p a c t B o a r d P C M - 8 1 5 0 WatchDog Timer Control Register (Index=71h, Default=00h) WatchDog Timer Configuration Register (Index=72h, Default=00h) WatchDog Timer Time-out Value Register (Index=73h, Default=00h) Appendix B Programming the Watchdog Timer...

  • Page 55: It8712 Watchdog Timer Initial Program

    C o m p a c t B o a r d P C M - 8 1 5 0 B.2 IT8712 Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting mov cl, 10 ;...
  • Page 56 C o m p a c t B o a r d P C M - 8 1 5 0 ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port] MOV DX,02Eh MOV CX,04h Init_1:...
  • Page 57 C o m p a c t B o a r d P C M - 8 1 5 0 Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,12h JNE Not_Initial Need_Initial: Not_Initial: Check_Chip ENDP...
  • Page 58 C o m p a c t B o a r d P C M - 8 1 5 0 MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h] OUT DX,AL Write_Configuration_Data ENDP Superio_Set_Reg proc near...
  • Page 59 C o m p a c t B o a r d P C M - 8 1 5 0 push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port Cfg_Port DB 087h,001h,055h,055h DW 02Eh,02Fh END Main...

Table of Contents