Aaeon PCM-4330 Instructions Manual page 118

NEC NL6448AC30-06
NEC NL6448AC30-10
NEC NL6448AC32-01
NEC NL6448AC33-10
NEC NL6448AC30-15
NEC NL8060AC24-01
NEC NL8060AC26-02
Hitachi TX26D60VC1CAB
FPD LDH102T-10
FPD LDH102T-20
The LCD-Enable-Signal (Panel Off Signal) is used to control the LC-displays
and can be set to low or high. Use the appropriate jumper to select the polarity of
this signal.
The following tables contain pin assignments for a range of standard LC-
displays to the pins of the universal LCD connector on the PCM-4330 board.
If you can not find a suitable display type in one of the tables and the examples
are insufficient to produce a custom cable, please contact your PCM-4330 dealer.
12 Bit Color TFT 6
12 Bit Color TFT 6
18 Bit Color TFT 5,6
12 Bit Color TFT 6
12 Bit Color TFT 6
special setting:
(800x600) 6,7
18 Bit-TFT
special setting:
(800x600) 6,7
18 Bit-TFT
18 Bit Color TFT 5,6
18 Bit Color TFD 5
18 Bit Color TFD 5
no contrast voltage
required
no contrast voltage
required
no contrast voltage
required
no contrast voltage
required
no contrast voltage
required
no contrast voltage
required
no contrast voltage
required
no contrast voltage
required
no contrast voltage
required
no contrast voltage
required