Setting Printer Top Margin - Lexmark Optra Color 1200 Service Manual

5050-001
ERROR LOG
US/Non US Defaults
EXIT DIAGNOSTICS

Setting Printer top Margin

The purpose of this function is to adjust the leading edge margin for
each tray. It is the top margin of how the page is printed. For A4 or
letter it is on the leading long edge of the page that the margin is
being adjusted.
K Top Margin Adjust Print Tests
The purpose of this function is to adjust the leading edge margin for
each tray. It is the top margin of the direction the page is printed. For
A4 or letter it is on the leading long edge of the page that the margin
is being adjusted. What is being adjusted is the time from when the
leading edge of the paper reaches the print registration rollers and
when the printer starts putting toner on the paper. You must adjust
both the CMY and K top margins. The K Top Margin must be
adjusted first.
To make this adjustment:
1. Select the Diagnostic Mode.
2. Select Printer Setup.
3. Select K Top Margin Adjust
4. Input the values.
To verify the margin values are correct, you must print the Quick Test
page. From the Tray X test screen press Select. While the page is
3-10
Service Manual
Reset 80 Maint
Display Log
Clear Log
See "Exiting
Diagnostics Mode" on
page 3-27.
= Yes
= No
• US
• Non US