Lexmark Optra Color 1200 Service Manual page 44

5050-001
Message or Symptom
Error
939 COMM Error
Printer Controller Board
941 Code ROM Error
942 Font ROM Error
943 RIP Controller Board, Font
Error
944 RIP Controller Card Error
945
946
947
950
953
954
NVRAM Failure
955
RIP Controller Card
Memory Error DRAM
960
Memory Error Option DRAM
961
964 Emulation Error
Download emulation CRC
failure
Action
Replace the printer controller
board (11G0324).
Replace the EEPROM code
controller, solid state drive (J10)
on the RIP control card.
Replace the EEPROM code
controller, solid state drive (J10)
(11G0607) on the RIP control
card.
The font and RIP controller card
(11G0604) are incompatible.
Replace the RIP controller card
(11G0604). Be sure to move the
solid state drive, memory, and
option cards from the old card to
the new one.
Replace the RIP controller card
(11G0604).
Replace memory SIMM J1 or J3
on the RIP controller card. These
must be in a set of 2, and must be
50 NS EDO SIMMS.
Replace memory SIMM J4 or J5
on the RIP controller card. These
must be in a set of two, and must
be 50 NS EDO SIMMS.
Contact Technical Support for
assistance.
Diagnostic Information
2-5