Setting Up The Printer To Fax - Lexmark MC3426i User Manual

Set up, install, and configure
For SMB, type the network folder address. For example, myServer/myShare/myFile.pdf. Type the
•
network domain name.
•
If necessary, select the Authentication type for FTP and SMB.
To limit access to the bookmark, enter a PIN.
Note: The application supports the following file types: PDF, JPEG, TIFF, and HTML-based web pages.
Other file types such as DOCX and XLXS are supported in some printer models.
4
Click Save.
Creating folders
1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Bookmarks > Add Folder, and then type a folder name.
Note: To limit access to the folder, enter a PIN.
3
Click Save.
Note: You can create folders or bookmarks inside a folder. To create a bookmark, see
on page 23.

Setting up the printer to fax

Supported fax
Printer model
CX331adwe
CX431adw
CX431dw
MC3224adwe
MC3224dwe
MC3224i
1
Needs a subscription. For more information, go to
you purchased the printer.
2
Needs an installed license bundle. For more information, contact the place where you purchased the printer.
Analog fax
etherFAX
X
X
X
1
Fax server
https://www.etherfax.net/lexmark
"Creating bookmarks"
Fax over IP (FoIP)
or contact the place where
24
2