5050-001
•
If the belt tracks too far to the right, rotate the collar
clockwise.
•
If the belt tracks too far to the left, rotate the collar counter-
clockwise.
Thermistor Rank Adjustment
Make this adjustment whenever you replace the transfer belt unit or
when you replace the EEPROM on the printer controller board.
See
"Thermistor Rank" on page
LED Head Light Quantity Adjustment
Make this adjustment whenever you replace the LED Head or the
EEPROM on the printer controller board.
See
"Light Quantity" on page
Top Margin for Color Mode
Make this adjustment whenever you replace the following parts:
3-14.
3-13.
Repair Information
4-5