Status Messages - Lexmark Optra Color 1200 Service Manual

5050-001

Status Messages

Message
Ready
Power Saver
Engine Warming
Performing Self Test The printer is running the normal series of start-up
Busy
Waiting
Not Ready
2-10
Service Manual
Meaning
The printer is ready to receive and process data.
When your printer is in power saver mode, the
message replaces the
Saver
display. When
Power Saver
ready to receive and process data.
When
Power Saver
• Press to quick start the printer.
Go
• Press or
Menu>
The printer is warming the fuser to prepare for printing.
tests it performs after it is turned on.
The printer is processing or printing data. (The light on
the operator panel flashes while this message is
displayed.) If a job name has been defined, the name
replaces the Busy message on the display.
To cancel the print job, press
Job Menu is displayed. Press
Cancel Job appears on the second line. Press
The printer has received a page of data to print but is
waiting for an End of Job or Form Feed command or
for additional data.
• To print the contents of the print buffer, press
• To cancel the print job, press
Job Menu is displayed. Press
Cancel Job appears on the second line. Press
.
Select
The printer is not ready to receive or process data,
because someone selected
message was displayed.
• Press to take the printer out of the Not Ready
Go
state.
• To cancel the print job, press
Job Menu is displayed. Press
Cancel Job appears on the second line. Press
.
Select
Ready
is displayed, your printer is
is displayed, you can:
to enter the menus.
<Menu
Menu>
Menu>
Menu>
Menu>
when another
Stop
Menu>
Menu>
Power
message on the
or . The
<Menu
or until
<Menu
.
Select
Go.
or . The
<Menu
or until
<Menu
or . The
<Menu
or until
<Menu