5050-001
HVU1(U) Removal
1. Remove the printer controller board.
2. Remove the harness from the wire saddle.
3. Remove the connector.
4. Remove the 7 mounting screws.
5. Remove HVU1(U) from the HVU bracket, (9 screws).
Drive 2 (U) and Face Up/Face Down (FUD) Solenoid
Removal
1. Remove the printer controller.
2. Remove the harness from the wire saddle.
3. Remove the mounting bracket stay, (1 black screw).
Repair Information
4-29