Lexmark Optra Color 1200 Service Manual page 72

5050-001
The paper has stopped at the registration roller or has not reached
the fuser.
If the fuser or exit rollers do not turn during POR, go to the
Stepper Motor Service Check" on page
FRU
1 • Registration
Roller
Clutch
• Registration
Roller
• Absorption
Roller
• Transfer
Belt Unit
• Rear Paper
Feed Guide
Action
Check these parts for wear or damage. Replace as
necessary. Be sure all guide surfaces in the paper
path are free of dirt.
Check the registration roller clutch for continuity.
Be sure connector CN104 on the printer controller
board is connected properly.
2-29.
Diagnostic Information
"Drive 2
2-33