Cp300/Cp300I Connection Table - Standard Horizon CP180 Owner's Manual

2.4.1

CP300/CP300i Connection Table

12VDC Power and NMEA PWR & ACC 1 Cable
Pin Wire Color Description
1 Black Battery Ground
2 Red Battery Positive
3 Green NMEA Common
4 Blue Port 1 Input
5 Brown Port 1 Output
6 Grey Port2 Input
7 White Port2 Output
8 Yellow Port 3 Output
NMEA ACC 2 Cable
Pin Wire Color Description
1 Black NC
2 Red NC
3 Green NMEA Common
4 Blue Port 4 Input
5 Brown Port 4 Output
6 Grey Port 5 Input
7 White Port 5 Output
8 Yellow NC
When an optional AIS receiver is connected, Port4 (or other Port the AIS is connected to) of the NMEA
In/Out Connections menu must be changed to AIS 38400 as shown below for communications.
When AIS 38400 is selected the Output Port is disabled.
1. From the Chart page, press [MENU], move the ShuttlePoint knob to highlight SETUP MENU and
press [ENT].
2. Move the ShuttlePoint knob to highlight ADVANCED SETUP and press [ENT] or move the
ShuttlePoint knob to the right.
3. Move the ShuttlePoint knob to highlight IN/OUT CONNECTIONS and press [ENT] or move the
ShuttlePoint knob to the right.
4. Move the ShuttlePoint knob to highlight PORT4 INPUT and press [ENT] or move the
ShuttlePoint knob to the right.
5. Move the ShuttlePoint knob up/down to select AIS 38400 and press [ENT] or move the
ShuttlePoint knob to the right.
6. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.
RS232 not opto-isolated electrical interface.
Video Connector
Pin Description
1 Ground
2 + 9 / 12 VDC
3 Video Signal +
Page 18
Connection Example
Connect to Battery Ground
Connect to Battery Positive
Common (ground) for NMEA devices**
Connect to Output of NMEA devices**
Connect to Input of NMEA devices**
Connect to FF525
Connect to FF525
Connect to Input of NMEA devices**
Connection Example
Common (ground) for NMEA devices**
Connect to Output of NMEA devices**
Connect to Input of NMEA devices**
Connect to Output of NMEA devices**
Connect to Input of NMEA devices**
NOTE*: AIS RECEIVER OPTION
NOTE**
Connection Example
Connect to Video Signal Ground of DVD/VCR/Video Cameras
Connect to Video Cameras Power Input
Connect to Video Signal + (NTSC/PAL) of DVD/VCR/Video Cameras
Additional Comments
Default is NMEA0183
Default is NMEA0183 with GGA, GLL, RMC,
XTE, DBT, DPT, MTW, VHW sentences
Default is Fish Finder
Default is Fish Finder
Default is NMEA0183 with APA, APB, BOD,
GGA, GLL, RMC and BOD sentences
Additional Comments
Default is NMEA0183*
Default is NMEA0183 with GLL, RMB, RMC
and XTE sentences
Default is NMEA0183
Default is NMEA0183 with GLL, RMB, RMC
and XTE sentences
GPS Chart Plotters